abrasive wear

The hi-Cr cast iron with eutectic composition or the composition a little higher than eutectic demonstrated excellent impact abrasive wear resistance, and adding W, Nb and some other elements had no obvious effect on increasing impact abrasive wear resistance.

共晶成分或稍微过共晶成分的高铬铸铁显示良好的抗冲击磨料磨损能力，而添加W、N等提高抗冲击磨损能力不明显。

互联网摘选

Experimental results show that the fine distributed ferrite phase in a proper proportion ( 10-20%) in the hard matrix of tempered martensite benefits the abrasive wear resistance.

研究结果表明，在硬质回火马氏体基体上均匀分布着适量（10～20%）细小条粒状软韧相铁素体对耐磨料磨损性是有益的。

互联网摘选

The abrasive wear mechanism of these two kinds of grinding balls was contrastively analysis.

采用冲击磨料磨损试验考察磨球材料与65Mn材料的磨损性能，对比分析了这两种材料的冲击磨损机理。

互联网摘选

Under conditions of abrasive wear and oil lubricant wear with different loads the wear resistance of straight carbon steels with different carbon contents strengthened by in situ TiC dispersion was studied.

研究了在磨粒磨损条件和不同载荷的油磨条件下，原位合成TiC弥散强化不同碳含量的普碳钢的磨损性能。

互联网摘选

The wear mechanism of original WC-Ni cemented carbide during the wear process is abrasive wear with the main characteristics of plastic deformation of Ni binder phase and fall-out of WC grains, and wear resistance depends on the hardness of cemented carbide.

原始WC-Ni硬质合金的磨损以Ni粘结相的塑性变形和WC晶粒脱落为主要特征的磨粒磨损，耐磨性依赖于硬质合金的硬度。

互联网摘选

The friction and wear of rod-like mullite dispersed yttria stabilized tetragonal zirconia polycrystals ( MDZ) sliding against a high-chromium cast iron in 5% NaOH solution containing 2wt% SiO_2 as the abrasive particles was investigated on an MM-200 test rig in a block-on-ring configuration.

研究了柱状莫来石弥散四方氧化锆多晶陶瓷（MDZ）在含质量分数2%SiO2磨粒的5%NaOH溶液中的摩擦磨损性能。

互联网摘选

The effect of varying mates on abrasive wear character of martensitic wear-resistant steel by MLD-10 type impact abrasion tester was investigated.

讨论了在动载三体磨粒磨损条件下，马氏体钢配副变化对磨粒磨损系统耐磨性的影响。

互联网摘选

Design and study of three-body abrasive wear testing machine

三体磨料磨损试验机设计研究

互联网摘选

The three-body abrasive wear experiment was performed at the room temperature.

通过常温三体磨料磨损实验研究了复合材料的磨损性能。

互联网摘选

Its comprehensive coverage focuses on key theoretical and practical considerations of abrasive wear.

它的广泛报导集中在磨损的关键理论和实践考虑。

互联网摘选

That of the transmission chain under periodical lubrication of oil brushing or oil dropping is abrasive wear, accompanied with fatigue wear.

定期刷油或滴油润滑条件下，摩托车传动链的磨损机制是磨粒磨损，并伴有疲劳磨损。

互联网摘选

Abrasive Wear Mechanism of SHS Coatings of Chromium Carbide Cermet

碳化铬SHS熔覆层的磨料磨损机理研究

互联网摘选

Abrasive Wear Behavior of Intermetallic Molybdenum Disilicide in Dry Friction

金属间化合物二硅化钼在干摩擦条件下的磨粒磨损特性

互联网摘选

Abrasive wear data of materials and material selecting for wearing parts

钢铁的磨损数据及易磨损零件的选材

互联网摘选

Comparative Study of the Three-Body Abrasive Wear Behavior of Natural Human Teeth and Plastic Teeth

天然牙和树脂牙体外三体磨粒磨损性能研究

互联网摘选

The main wear mechanisms are oxidation wear, adhesive wear, and abrasive wear.

主要磨损机制为氧化磨损 、 粘着磨损和磨粒磨损.

互联网摘选

A Model of the Abrasive Wear of Composites Reinforced by Three-dimensional Network Structure

三维网络结构增强复合材料磨损模型的研究

互联网摘选

The main wear mechanisms of the coating are abrasive wear and delamination wear.

涂层的磨损机制主要是磨粒磨损和剥层磨损.

互联网摘选

It has been shown that fatigue spalling is the main wear mechanism, abrasive wear also exist.

结果表明,渗层磨损机制以疲劳剥落为主, 兼有磨粒磨损.

互联网摘选

Study of Abrasive Wear Resistance of Bionics Non-smooth Topography on Roller Surface Made by Laser Carving Technology

轧辊表面激光雕刻仿生非光滑形态耐磨性研究

互联网摘选

In the same time, abrasive wear is the major failure reason in mining machines.

在矿山机械中,磨粒磨损(它包括冲蚀磨损 、 磨料磨损和微动磨损)是其磨损失效的主要原因.

互联网摘选

The old lubricant should, therefore be cleaned off periodically to prevent abrasive wear.

为防止齿轮遭受磨损起见,应定期将旧复合剂加以清除.

互联网摘选

The resilient wide seating surface provides tight shutoff, minimizing abrasive wear.

弹性宽广的阀座密封表面能够实现紧密密封, 最大限度减少研磨磨损.

互联网摘选

An Elementary Study on Micro-scale Abrasive Wear and Corrosion Properties for TiN Coatings of Medical Titanium Alloys

生物医用钛合金TiN涂层微磨粒磨损及耐蚀性初步研究

互联网摘选

Abrasive Wear Resistance of ( Cu, Ti) Based Metallic Glass

铜钛基金属玻璃的耐磨性研究

互联网摘选

The micro-scale abrasive wear behaviors of TAMZ alloy were studied using a TE66 micro-scale abrasion tester.

采用TE66试验机对新型TAMZ钛合金的微磨粒磨损行为进行了研究。

互联网摘选

Its main wear mechanisms are plastic smearing, abrasive wear and fatigue spalling.

其磨损机理主要有塑性涂抹 、 磨粒磨损和疲劳剥落.

互联网摘选

The wear mechanisms of 45 are mainly abrasive wear and adhesive wear.

磨损机理主要为磨粒磨损和粘着磨损.

网络文摘精选

Investigation of properties and mechanism of abrasive wear of boride layer

硼化物层的磨料磨损特性及磨损机理

互联网摘选

The wear mechnisms of coated cutting tools mainly are flank wear and abrasive wear, accompany with adhesive wear, oxidation wear and breakage of the tool tip/ cutting edge.

涂层铣刀磨损方式主要是后刀面磨损和磨粒磨损，伴随着粘接磨损，氧化磨损以及刀尖和刀刃的破损。

互联网摘选